 | Chapter 1 Oracle PL/SQL Built-ins Pocket Reference |  |
PL/SQL packages allow you to collect related program elements and control access to those elements. Oracle provides a rich set of built-in packages that extend the functionality of PL/SQL in many important ways. Many of the built-ins allow you access to features that would otherwise be unavailable to you. You will find these packages helpful in developing applications, managing server-side resources, and performing many other operations.
The built-in packages are listed in this section in alphabetical order. For each package, we've shown the header (calling sequence) for each of the programs defined in the package, and provided a brief description of the program operation.
There are two default packages that deserve special mention. The STANDARD package contains many of the basic elements of the PL/SQL language (datatypes, functions, even basic operations like + and -). We describe the STANDARD functions later, in the Section 1.4, "Built-in Functions" section.
The DBMS_STANDARD package, described in this section, contains kernel extensions to the STANDARD package.
DBMS_ALERT provides mechanisms for synchronous, transaction-based notification to multiple sessions that specific database events have occurred.
PROCEDURE DBMS_ALERT.REGISTER
(name IN VARCHAR2);Registers the calling session to receive notification of alert name.
PROCEDURE DBMS_ALERT.REMOVE
(name IN VARCHAR2);Unregisters the calling session from receiving notification of alert name.
PROCEDURE DBMS_ALERT.REMOVEALL;
Unregisters the calling session from notification of all alerts.
PROCEDURE DBMS_ALERT.SET_DEFAULTS
(sensitivity IN NUMBER);Defines configurable settings for the calling session. (sensitivity defines the loop interval sleep time in seconds.)
PROCEDURE DBMS_ALERT.SIGNAL
(name IN VARCHAR2
,message IN VARCHAR2);Signals the occurrence of alert name and attaches message. (Sessions registered for alert name are notified only when the signaling transaction commits.)
PROCEDURE DBMS_ALERT.WAITANY
(name OUT VARCHAR2
,message OUT VARCHAR2
,status OUT INTEGER
,timeout IN NUMBER DEFAULT MAXWAIT);Waits for up to timeout seconds to be notified of any alerts for which the session is registered. If status = 0 then name and message contain alert information. If status = 1 then timeout seconds elapsed without notification of any alert.
PROCEDURE DBMS_ALERT.WAITONE
(name IN VARCHAR2
,message OUT VARCHAR2
,status OUT INTEGER
,timeout IN NUMBER DEFAULT MAXWAIT);Waits for up to timeout seconds for notification of alert name. If status = 0 then message contains alert information. If status = 1 then timeout seconds elapsed without notification.
DBMS_APPLICATION_INFO allows applications to register their current execution status into several of the Oracle V$ virtual tables.
PROCEDURE DBMS_APPLICATION_INFO.READ_CLIENT_INFO
(client_info OUT VARCHAR2);Returns the currently registered client_info for the session.
PROCEDURE DBMS_APPLICATION_INFO.READ_MODULE
(module_name OUT VARCHAR2
,action_name OUT VARCHAR2);Returns the currently registered module_name and action_name for the session.
PROCEDURE DBMS_APPLICATION_INFO.SET_ACTION
(action_name IN VARCHAR2);Registers action_name into V$SESSION and V$SQLAREA as the current action for the session.
PROCEDURE DBMS_APPLICATION_INFO.SET_CLIENT_INFO
(client_info IN VARCHAR2);Registers client_info into V$SESSION as the current client information for the session.
PROCEDURE DBMS_APPLICATION_INFO.SET_MODULE
(module_name IN VARCHAR2
,action_name IN VARCHAR2);Registers module_name and action_name into V$SESSION and V$SQLAREA as the current module and action for the session.
PROCEDURE DBMS_APPLICATION_INFO.SET_SESSION_LONGOPS
(hint IN OUT BINARY_INTEGER
,context IN NUMBER DEFAULT 0
,stepid IN NUMBER DEFAULT 0
,stepsofar IN NUMBER DEFAULT 0
,steptotal IN NUMBER DEFAULT 0
,sofar IN NUMBER DEFAULT 0
,totalwork IN NUMBER DEFAULT 0
,application_data_1 IN NUMBER DEFAULT 0
,application_data_2 IN NUMBER DEFAULT 0
,application_data_3 IN NUMBER DEFAULT 0);Inserts or updates runtime data for long-running operations in the V$SESSION_LONGOPS virtual table. Rows are identified by the value of hint; a new row is acquired when hint is set to the package constant set_session_longops_nohint. Unique combinations of context and stepid also force a new row.
The SET_SESSION_LONGOPS procedure is used to track the progress of long-running operations by allowing the entry and modification of data in the V$SESSION_LONGOPS virtual table.
The DBMS_AQ package allows you to enqueue to and dequeue messages from queues created in the Oracle Advanced Queuing facility. Oracle8 only.
PROCEDURE DBMS_AQ.ENQUEUE
(queue_name IN VARCHAR2
,enqueue_options IN DBMS_AQ.ENQUEUE_OPTIONS_T
,message_properties IN DBMS_AQ.MESSAGE_PROPERTIES_T
,payload IN payload_type
,msgid OUT RAW);Adds the message payload to the queue queue_name, using the options specified by the enqueue_options record. The payload_type is either RAW or the name of an object TYPE. Returns the pointer to the message in msgid.
PROCEDURE DBMS_AQ.DEQUEUE
(queue_name IN VARCHAR2
,dequeue_options IN DBMS_AQ.DEQUEUE_OPTIONS_T
,message_properties OUT DBMS_AQ.MESSAGE_PROPERTIES_T
,payload OUT <payload_type>
,msgid OUT RAW);Retrieves the message payload (either a RAW or an object of the specified TYPE) with message_properties specified by the dequeue_options. Also returns the msgid of that message.
The DBMS_AQADM package provides a set of programs you can use to create, manage, and drop queues and queue tables in the Oracle Advanced Queuing facility.
PROCEDURE DBMS_AQADM.CREATE_QUEUE_TABLE
(queue_table IN VARCHAR2
,queue_payload_type IN VARCHAR2
,storage_clause IN VARCHAR2 DEFAULT NULL
,sort_list IN VARCHAR2 DEFAULT NULL
,multiple_consumers IN BOOLEAN DEFAULT FALSE
,message_grouping IN BINARY_INTEGER DEFAULT NONE
,comment IN VARCHAR2 DEFAULT NULL
,auto_commit IN BOOLEAN DEFAULT TRUE);Creates a queue table named queue_table of queue_payload_type (RAW or the name of an object TYPE).
PROCEDURE DBMS_AQADM.CREATE_QUEUE
(queue_name IN VARCHAR2
,queue_table IN VARCHAR2
,queue_type IN BINARY_INTEGER DEFAULT NORMAL_QUEUE
,max_retries IN NUMBER DEFAULT 0
,retry_delay IN NUMBER DEFAULT 0
,retention_time IN NUMBER DEFAULT 0
,dependency_tracking IN BOOLEAN DEFAULT FALSE
,comment IN VARCHAR2 DEFAULT NULL
,auto_commit IN BOOLEAN DEFAULT TRUE);Creates a queue named queue_name in the queue table queue_table.
PROCEDURE DBMS_AQADM.DROP_QUEUE
(queue_name IN VARCHAR2
,auto_commit IN BOOLEAN DEFAULT TRUE);Drops the queue_name queue.
PROCEDURE DBMS_AQADM.DROP_QUEUE_TABLE
(queue_table IN VARCHAR2
,force IN BOOLEAN DEFAULT FALSE
,auto_commit IN BOOLEAN DEFAULT TRUE);Drops the queue_name queue from the queue table queue_table.
PROCEDURE DBMS_AQADM.START_QUEUE
(queue_name IN VARCHAR2
,enqueue IN BOOLEAN DEFAULT TRUE
,dequeue IN BOOLEAN DEFAULT TRUE);Starts the queue_name queue with enqueue and/or dequeue capabilities.
PROCEDURE DBMS_AQADM.STOP_QUEUE
(queue_name IN VARCHAR2
,enqueue IN BOOLEAN DEFAULT TRUE
,dequeue IN BOOLEAN DEFAULT TRUE
,wait IN BOOLEAN DEFAULT TRUE);Stops the queue_name queue for enqueue and/or dequeue capabilities with/without waiting for completion of outstanding transactions.
PROCEDURE DBMS_AQADM.ALTER_QUEUE
(queue_name IN VARCHAR2
,max_retries IN NUMBER DEFAULT NULL
,retry_delay IN NUMBER DEFAULT NULL
,retention_time IN NUMBER DEFAULT NULL
,auto_commit IN BOOLEAN DEFAULT TRUE);Alters the specified characteristics of the queue_name queue.
PROCEDURE DBMS_AQADM.ADD_SUBSCRIBER
(queue_name IN VARCHAR2
,subscriber IN SYS.AQ$_AGENT);Adds the subscriber agent to the queue_name queue.
PROCEDURE DBMS_AQADM.REMOVE_SUBSCRIBER
(queue_name IN VARCHAR2
,subscriber IN SYS.AQ$_AGENT);Removes the subscriber agent from the queue_name queue.
PROCEDURE DBMS_AQADM.GRANT_TYPE_ACCESS
(user_name IN VARCHAR2);Grants to user_name the ability to create queues that work with multiple consumers.
FUNCTION DBMS_AQADM.QUEUE_SUBSCRIBERS
(queue_name IN VARCHAR2)
RETURN AQ$_SUBSCRIBER_LIST_T;Returns the list of subscribers for the queue_name queue.
PROCEDURE DBMS_AQADM.START_TIME_MANAGER;
Starts the Queue Monitor process.
PROCEDURE DBMS_AQADM.STOP_TIME_MANAGER;
Stops the Queue Monitor process.
DBMS_DDL contains programs to recompile stored code, analyze and compute statistics for database objects, and modify the referenceability of object identifiers in Oracle8.
PROCEDURE DBMS_DDL.ALTER_COMPILE
(type IN VARCHAR2
,schema IN VARCHAR2
,name IN VARCHAR2);Recompiles the stored PL/SQL object name (case-sensitive) owned by schema of type type. NULL schema uses current schema. Valid values for type are PROCEDURE, FUNCTION, PACKAGE, PACKAGE BODY, and PACKAGE SPECIFICATION.
PROCEDURE DBMS_DDL.ALTER_TABLE_NOT_REFERENCEABLE
(table_name IN VARCHAR2
,table_schema IN VARCHAR2 DEFAULT NULL
,affected_schema IN VARCHAR2 DEFAULT NULL);Reverts references to object table_name by schema affected_schema from table_name owned by table_schema to the default. Oracle8 only.
PROCEDURE DBMS_DDL.ALTER_TABLE_REFERENCEABLE
(table_name IN VARCHAR2
,table_schema IN VARCHAR2 DEFAULT NULL
,affected_schema IN VARCHAR2 DEFAULT NULL);Makes the object table owned by table_schema the table referenced from schema affected_schema for object name table_name. Oracle8 only.
PROCEDURE DBMS_DDL.ANALYZE_OBJECT
(type IN VARCHAR2
,schema IN VARCHAR2
,name IN VARCHAR2
,method IN VARCHAR2
,estimate_rows IN NUMBER DEFAULT NULL
,estimate_percent IN NUMBER DEFAULT NULL
,method_opt IN VARCHAR2 DEFAULT NULL);Analyzes database object name owned by schema of type type (TABLE, INDEX, or CLUSTER) using option method (ESTIMATE, NULL, or DELETE). When method is ESTIMATE, either estimate_rows or estimate_percent must be specified to identify sample size. Additional analyze options specifiable by method_opt are FOR TABLE, FOR ALL COLUMNS [SIZE N], FOR ALL INDEXED COLUMNS [SIZE N], and FOR ALL INDEXES.
The DBMS_DESCRIBE package contains a single procedure used to describe the arguments of a stored PL/SQL procedure or function.
PROCEDURE DBMS_DESCRIBE.DESCRIBE_PROCEDURE
(object_name IN VARCHAR2
,reserved1 IN VARCHAR2
,reserved2 IN VARCHAR2
,overload OUT DBMS_DESCRIBE.NUMBER_TABLE
,position OUT DBMS_DESCRIBE.NUMBER_TABLE
,level OUT DBMS_DESCRIBE.NUMBER_TABLE
,argument_name OUT DBMS_DESCRIBE.VARCHAR2_TABLE
,datatype OUT DBMS_DESCRIBE.NUMBER_TABLE
,default_value OUT DBMS_DESCRIBE.NUMBER_TABLE
,in_out OUT DBMS_DESCRIBE.NUMBER_TABLE
,length OUT DBMS_DESCRIBE.NUMBER_TABLE
,precision OUT DBMS_DESCRIBE.NUMBER_TABLE
,scale OUT DBMS_DESCRIBE.NUMBER_TABLE
,radix OUT DBMS_DESCRIBE.NUMBER_TABLE
,spare OUT DBMS_DESCRIBE.NUMBER_TABLE);Returns information about the parameters and RETURN type (if a function) of the specified object (procedure or function) in a set of PL/SQL tables, whose types are described in the same package.
DBMS_JOB is an interface into the Oracle job queue subsystem that allows automated, unattended scheduling and execution of PL/SQL programs.
PROCEDURE DBMS_JOB.BROKEN
(job IN BINARY_INTEGER
,broken IN BOOLEAN
,next_date IN DATE DEFAULT SYSDATE);Sets or unsets the Boolean broken flag for the job, and optionally sets the next execution date specified by next_date. Jobs flagged with broken = TRUE are not automatically executed.
PROCEDURE DBMS_JOB.CHANGE
(job IN BINARY_INTEGER
,what IN VARCHAR2
,next_date IN DATE
,interval IN VARCHAR2);Changes one or more of the parameters what, next_date, or interval for job.
PROCEDURE DBMS_JOB.INTERVAL
(job IN BINARY_INTEGER
,interval IN VARCHAR2);Changes the date expression used to determine the next execution date for job to interval.
PROCEDURE DBMS_JOB.ISUBMIT
(job IN BINARY_INTEGER
,what IN VARCHAR2
,next_date IN VARCHAR2
,interval IN VARCHAR2 DEFAULT `null'
,no_parse IN BOOLEAN DEFAULT FALSE);Submits a job with the specified job number and PL/SQL definition what, scheduled to execute at next_date and every interval thereafter. When no_parse is TRUE, parsing of the PL/SQL in what is deferred until execution.
PROCEDURE DBMS_JOB.NEXT_DATE
(job IN BINARY_INTEGER
,next_date IN DATE);Changes the next scheduled date of execution for job to next_date.
PROCEDURE DBMS_JOB.REMOVE
(job IN BINARY_INTEGER);Removes job from the job queue. If job is currently executing, it will run to normal completion, but will not be rescheduled.
PROCEDURE DBMS_JOB.RUN
(job IN BINARY_INTEGER);Immediately executes job in the current session.
PROCEDURE DBMS_JOB.SUBMIT
(job OUT BINARY_INTEGER
,what IN VARCHAR2
,next_date IN DATE DEFAULT SYSDATE
,interval IN VARCHAR2 DEFAULT `null'
,no_parse IN BOOLEAN DEFAULT FALSE);Submits a job to the job queue with PL/SQL definition what, scheduled to execute at next_date and every interval thereafter. Job returns the identification number for the job. When no_parse is TRUE, parsing of the PL/SQL in what is deferred until execution.
PROCEDURE DBMS_JOB.USER_EXPORT
(job IN BINARY_INTEGER
,mycall IN OUT VARCHAR2);Returns a character string in mycall containing a call to DBMS_JOB.ISUBMIT that can be used to re-submit job to the job queue.
PROCEDURE DBMS_JOB.WHAT
(job IN BINARY_INTEGER
,what IN VARCHAR2);Changes the PL/SQL definition for job to what.
DBMS_LOB provides a mechanism for accessing and manipulating large objects. LOBs include BLOBs (binary large objects), CLOBs (character large objects), NCLOBs (National Language Support character large objects), and BFILEs (binary files). The CHARACTER SET ANY_CS clauses in the CLOB declarations allow either CLOB or NCLOB locators. Oracle 8 only.
PROCEDURE DBMS_LOB.APPEND
(dest_lob IN OUT BLOB
,src_lob IN BLOB);
PROCEDURE DBMS_LOB.APPEND
(dest_lob IN OUT CLOB CHARACTER SET ANY_CS
,src_lob IN CLOB CHARACTER SET dest_lob%CHARSET);Appends the contents of the source LOB src_lob to the destination LOB dest_lob. Both src_lob and dest_lob must be of the same LOB type: BLOB, CLOB, or NCLOB.
FUNCTION DBMS_LOB.COMPARE
(lob_1 IN BLOB | CLOB CHARACTER SET ANY_CS
,lob_2 IN BLOB | CLOB CHARACTER SET lob_1%CHARSET
,amount IN INTEGER := 4294967295
,offset_1 IN INTEGER := 1
,offset_2 IN INTEGER := 1)
RETURN INTEGER;
FUNCTION DBMS_LOB.COMPARE
(file_1 IN BFILE
,file_2 IN BFILE
,amount IN INTEGER
,offset_1 IN INTEGER := 1
,offset_2 IN INTEGER := 1)
RETURN INTEGER;Compares input LOBs lob_1 and lob_2 or file_1 and file_2 across amount bytes, optionally starting the comparison offset_1 and offset_2 bytes into the input files. Both inputs must be of the same LOB type: BLOB, CLOB, NCLOB, or BFILE.
Returns 0 if they exactly match, non-0 if they don't match, or NULL if any of amount, offset_1, or offset_2 are either less than 1 or greater than lobmaxsize.
PROCEDURE DBMS_LOB.COPY
(dest_lob IN OUT BLOB,
,src_lob IN BLOB
,amount IN INTEGER
,dest_offset IN INTEGER := 1
,src_offset IN INTEGER := 1);
PROCEDURE DBMS_LOB.COPY
(dest_lob IN OUT CLOB CHARACTER SET ANY_CS
,src_lob IN CLOB CHARACTER SET dest_lob%CHARSET,
,amount IN INTEGER
,dest_offset IN INTEGER := 1
,src_offset IN INTEGER := 1);Copies amount bytes (BLOB) or characters (CLOB) from source LOB lob_loc, starting src_offset bytes or characters into the source LOB to the destination (target) LOB, dest_lob, starting dest_offset into the destination LOB. Both src_lob and dest_lob must be the same LOB type: BLOB, CLOB, or NCLOB.
PROCEDURE DBMS_LOB.ERASE
(lob_loc IN OUT BLOB | CLOB CHARACTER SET ANY_CS
,amount IN OUT INTEGER
,offset IN INTEGER := 1);Erases (zero byte fill) amount bytes (BLOB) or characters (CLOB) in the LOB lob_loc, beginning offset bytes or characters into the LOB lob_loc.
PROCEDURE DBMS_LOB.FILECLOSE
(file_loc IN OUT BFILE);Closes the BFILE file_loc, whether it is open or not.
PROCEDURE DBMS_LOB.FILECLOSEALL;
Closes all open BFILEs in the current session.
FUNCTION DBMS_LOB.FILEEXISTS
(file_loc IN BFILE)
RETURN INTEGER;Returns 1 if BFILE file_loc exists; returns 0 otherwise.
PROCEDURE DBMS_LOB.FILEGETNAME
(file_loc IN BFILE
,dir_alias OUT VARCHAR2
,filename OUT VARCHAR2);Gets directory alias (as previously defined via the CREATE DIRECTORY command) and filename for the given file locator file_loc.
FUNCTION DBMS_LOB.FILEISOPEN
(file_loc IN BFILE)
RETURN INTEGER;Returns 1 if the BFILE file_loc is open; returns 0 otherwise.
PROCEDURE DBMS_LOB.FILEOPEN
(file_loc IN OUT BFILE
,open_mode IN BINARY_INTEGER := FILE_READONLY);Opens BFILE file_loc for read-only access.
FUNCTION DBMS_LOB.GETLENGTH
(lob_loc IN BLOB)
RETURN INTEGER;
FUNCTION DBMS_LOB.GETLENGTH
(lob_loc IN CLOB CHARACTER SET ANY_CS)
RETURN INTEGER;
FUNCTION DBMS_LOB.GETLENGTH
(lob_loc IN BFILE)
RETURN INTEGER;Returns the size in bytes or characters of the LOB lob_loc.
FUNCTION DBMS_LOB.INSTR
(lob_loc IN BLOB | BFILE
,pattern IN RAW
,offset IN INTEGER := 1
,nth IN INTEGER := 1)
RETURN INTEGER;
FUNCTION DBMS_LOB.INSTR
(lob_loc IN CLOB CHARACTER SET ANY_CS
,pattern IN VARCHAR2 CHARACTER SET lob_loc%CHARSET
,offset IN INTEGER := 1
,nth IN INTEGER := 1)
RETURN INTEGER;Similar to the built-in function INSTR. Returns the byte (BLOB) or character (CLOB) offset in LOB lob_loc where the nth occurrence of pattern is found. The search begins offset bytes or characters into lob_loc.
PROCEDURE DBMS_LOB.LOADFROMFILE
(dest_lob IN OUT BLOB | CLOB CHARACTER SET ANY_CS
,src_lob IN BFILE
,amount IN INTEGER
,dest_offset IN INTEGER := 1
,src_offset IN INTEGER := 1);Copies amount bytes of data from the source BFILE src_lob to the destination (target) LOB dest_lob, starting src_offset bytes into the source BFILE and dest_offset bytes into the destination (target) LOB.
PROCEDURE DBMS_LOB.READ
(lob_loc IN BLOB | BFILE
,amount IN OUT BINARY_INTEGER
,offset IN INTEGER
,buffer OUT RAW);
PROCEDURE DBMS_LOB.READ
(lob_loc IN CLOB CHARACTER SET ANY_CS
,amount IN OUT BINARY_INTEGER
,offset IN INTEGER
,buffer OUT VARCHAR2 CHARACTER SET lob_loc%CHARSET);Copies amount bytes (BLOB) or characters (CLOB) from source LOB lob_loc, starting offset bytes or characters into the LOB to the destination (target) variable, buffer. Returns the actual number of bytes or characters copied in amount.
FUNCTION DBMS_LOB.SUBSTR
(lob_loc IN BLOB | BFILE
,amount IN INTEGER := 32767
,offset IN INTEGER := 1)
RETURN RAW;
FUNCTION DBMS_LOB.SUBSTR
(lob_loc IN CLOB CHARACTER SET ANY_CS
,amount IN INTEGER := 32767
,offset IN INTEGER := 1)
RETURN VARCHAR2 CHARACTER SET lob_loc%CHARSET; Similar to the built-in function SUBSTR. Returns amount bytes (BLOB) or characters (CLOB) of the LOB lob_loc starting offset bytes or characters into the LOB.
PROCEDURE DBMS_LOB.TRIM
(lob_loc IN OUT BLOB | CLOB CHARACTER SET ANY_CS
,newlen IN INTEGER);Truncates the LOB lob_loc to newlen bytes (BLOB) or characters (CLOB).
PROCEDURE DBMS_LOB.WRITE
(lob_loc IN OUT BLOB
,amount IN BINARY_INTEGER
,offset IN INTEGER
,buffer IN RAW);
PROCEDURE DBMS_LOB.WRITE
(lob_loc IN OUT CLOB CHARACTER SET ANY_CS
,amount IN BINARY_INTEGER
,offset IN INTEGER
,buffer IN VARCHAR2 CHARACTER SET lob_loc%CHARSET);Copies amount bytes from source variable buffer to the destination LOB lob_loc, starting offset bytes (BLOB) or characters (CLOB) into the LOB, overwriting any existing data in lob_loc.
DBMS_LOCK makes Oracle lock management services available for implementation of specialized, non-data locking and serialization requirements within applications.
PROCEDURE DBMS_LOCK.ALLOCATE_UNIQUE
(lockname IN VARCHAR2
,lockhandle OUT VARCHAR2
,expiration_secs IN INTEGER DEFAULT 864000);Allocates a unique lockhandle for the lock identified by lockname to last for expiration_secs seconds. Also performs a COMMIT.
FUNCTION DBMS_LOCK.CONVERT
(id IN INTEGER | lockhandle IN VARCHAR2
,lockmode IN INTEGER
,timeout IN NUMBER DEFAULT MAXWAIT)
RETURN INTEGER;Converts the lock identified by either id or lockhandle to the mode specified by lockmode, waiting for up to timeout seconds for successful completion. lockmode must be a valid constant as defined in the DBMS_LOCK package. Return values are 0 = success; 1 = timed out; 2 = deadlock; 3 = parameter error; 4 = do not own lock, cannot convert; or 5 = illegal lockhandle.
FUNCTION DBMS_LOCK.RELEASE
(id IN INTEGER | lockhandle IN VARCHAR2)
RETURN INTEGER;Releases the lock identified by either id or lockhandle. Return values are: 0 = success; 3 = parameter error; 4 = do not own lock, cannot release; or 5 = illegal lockhandle.
FUNCTION DBMS_LOCK.REQUEST
(id IN INTEGER | lockhandle IN VARCHAR2
,lockmode IN INTEGER DEFAULT X_MODE
,timeout IN INTEGER DEFAULT MAXWAIT
,release_on_commit IN BOOLEAN DEFAULT FALSE)
RETURN INTEGER;Acquires the lock identified by either id or lockhandle in the mode specified by lockmode, waiting for up to timeout seconds for successful completion. When release_on_commit is TRUE, the lock is automatically released by transaction COMMIT or ROLLBACK. lockmode must be a valid constant as defined in the DBMS_LOCK package. Return values are 0 = success; 1 = timed out; 2 = deadlock; 3 = parameter error; 4 = do not own lock, cannot convert; or 5 = illegal lockhandle.
PROCEDURE DBMS_LOCK.SLEEP
(seconds IN NUMBER);Suspends the session for seconds seconds.
This package provides a mechanism for displaying information on your session's output device from within a PL/SQL program. You can use it as a crude debugger or trace facility.
PROCEDURE DBMS_OUTPUT.DISABLE;
Disables output from the package and purges the DBMS_OUTPUT buffer.
PROCEDURE DBMS_OUTPUT.ENABLE
(buffer_size IN INTEGER DEFAULT 20000);Enables output from the package and sets to buffer_size the maximum number of bytes that can be stored in the buffer.
PROCEDURE DBMS_OUTPUT.GET_LINE
(line OUT VARCHAR2
,status OUT INTEGER);Gets the next line from the buffer and places it in line. A status of 0 means successful retrieval; 1 means failure.
PROCEDURE DBMS_OUTPUT.GET_LINES
(lines OUT DBMS_OUTPUT.CHARARR
,numlines IN OUT INTEGER);Gets numlines number of lines from the buffer and places them in the lines PL/SQL table.
PROCEDURE DBMS_OUTPUT.NEW_LINE;
Writes a newline character to the DBMS_OUTPUT buffer.
PROCEDURE DBMS_OUTPUT.PUT
(a IN DATE|NUMBER|VARCHAR2);Puts the data contained in a in the DBMS_OUTPUT buffer and does not append a newline character.
PROCEDURE DBMS_OUTPUT.PUT_LINE
(a IN DATE|NUMBER|VARCHAR2);Puts the data contained in a in the DBMS_OUTPUT buffer and then appends a newline character.
DBMS_PIPE permits communication of messages between database sessions using memory-based structures. Communication is asynchronous, non-transactional, and persists beyond session lifetime.
FUNCTION DBMS_PIPE.CREATE_PIPE
(pipename IN VARCHAR2
,maxpipesize IN INTEGER DEFAULT 8192
,private IN BOOLEAN DEFAULT TRUE)
RETURN INTEGER;Creates a pipe identified by pipename with maximum size maxpipesize and returns 0. When private is FALSE, the pipe is publicly accessible.
FUNCTION DBMS_PIPE.NEXT_ITEM_TYPE RETURN INTEGER;
Returns an integer identifying the datatype of the next item in the session message buffer.
PROCEDURE DBMS_PIPE.PACK_MESSAGE
(item IN VARCHAR2 | NUMBER | DATE);Packs item into the session message buffer, overloaded on the datatype of item.
PROCEDURE DBMS_PIPE.PACK_MESSAGE_RAW
(item IN RAW);Packs the raw data in item into the session message buffer.
PROCEDURE DBMS_PIPE.PACK_MESSAGE_ROWID
(item IN ROWID);Packs the ROWID data in item into the session message buffer.
PROCEDURE DBMS_PIPE.PURGE
(pipename IN VARCHAR2);Purges all messages from pipename.
FUNCTION DBMS_PIPE.RECEIVE_MESSAGE
(pipename IN VARCHAR2
,timeout IN INTEGER DEFAULT MAXWAIT)
RETURN INTEGER;Receives a message from pipename into the session message buffer, waiting for up to timeout seconds for successful completion. Returns 0 for success and 1 for timeout.
FUNCTION DBMS_PIPE.REMOVE_PIPE
(pipename IN VARCHAR2)
RETURN INTEGER;Removes pipename and frees its memory back to the shared pool, returning 0.
PROCEDURE DBMS_PIPE.RESET_BUFFER;
Resets the session message buffer's pack and unpack indicators, effectively discarding all contents.
FUNCTION DBMS_PIPE.SEND_MESSAGE
(pipename IN VARCHAR2
,timeout IN INTEGER DEFAULT MAXWAIT
,maxpipesize IN INTEGER DEFAULT 8192)
RETURN INTEGER;Sends the contents of the session message buffer onto pipename, waiting for up to timeout seconds for successful completion and optionally increasing the maximum size of pipename to maxpipesize. Returns 0 for success and 1 for timeout.
FUNCTION DBMS_PIPE.UNIQUE_SESSION_NAME RETURN VARCHAR2;
Returns a string identifier unique to the session up to 30 bytes in length.
PROCEDURE DBMS_PIPE.UNPACK_MESSAGE
(item OUT VARCHAR2 | NUMBER | DATE);Unpacks the next data item in the message buffer into item, overloaded on the datatype of item.
PROCEDURE DBMS_PIPE.UNPACK_MESSAGE_RAW
(item OUT RAW);Unpacks the next data item in the message buffer into item when it is of datatype RAW.
PROCEDURE DBMS_PIPE.UNPACK_MESSAGE_ROWID
(item OUT ROWID);Unpacks the next data item in the message buffer into item when it is of datatype ROWID.
DBMS_RANDOM provides a random number generating utility. Oracle8 only.
PROCEDURE DBMS_RANDOM.INITIALIZE
(seed IN BINARY_INTEGER);Initializes the random number generator with the value of seed, which should be at least five digits in length.
FUNCTION DBMS_RANDOM.RANDOM RETURN BINARY_INTEGER;
Returns a random integer value from the random number generator.
PROCEDURE DBMS_RANDOM.SEED
(seed IN BINARY_INTEGER);Changes the random number generator's seed value to seed, which should be at least five digits in length.
PROCEDURE DBMS_RANDOM.TERMINATE;
Releases resources used by the random number generator when no longer needed.
DBMS_ROWID provides routines for working with ROWIDs. ROWIDs changed structure in Oracle8, and for Oracle8 this built-in works with both the old and new ROWID types.
An Oracle7 (restricted) ROWID has three parts in base 16 (hex):
| BBBBBBBB.RRRR.FFFF |
An Oracle8 (extended) ROWID has four parts in base 64:
| OOOOOOFFFBBBBBBRRR |
where:
| OOOOOO is the object number. |
| FFFF (FFF) is the absolute (V7) or relative (V8) file number. |
| BBBBBBBB (BBBBBB) is the block number within the file. |
| RRRR (RRR) is the row number within the block. |
FUNCTION DBMS_ROWID.ROWID_BLOCK_NUMBER
(row_id IN ROWID)
RETURN NUMBER;Returns the block number component of row_id.
FUNCTION DBMS_ROWID.ROWID_CREATE
(rowid_type IN NUMBER
,object_number IN NUMBER
,relative_fno IN NUMBER
,block_number IN NUMBER
,row_number IN NUMBER)
RETURN ROWID;Creates a rowid_type ROWID composed of object_number, relative_fno, block_number, and row_number ROWID. rowid_type can beROWID_TYPE_EXTENDED or ROWID_TYPE_RESTRICTED. object_number can be ROWID_OBJECT_UNDEFINED or the object number (OID).
PROCEDURE DBMS_ROWID.ROWID_INFO
(rowid_in IN ROWID
,rowid_type OUT NUMBER
,object_number OUT NUMBER
,relative_fno OUT NUMBER
,block_number OUT NUMBER
,row_number OUT NUMBER);Parses rowid_in into its individual components. rowid_type can beROWID_TYPE_EXTENDED or ROWID_TYPE_RESTRICTED. object_number can be ROWID_OBJECT_UNDEFINED or the object number (OID).
FUNCTION DBMS_ROWID.ROWID_OBJECT
(row_id IN ROWID)
RETURN NUMBER;Returns the object number component of row_id.
FUNCTION DBMS_ROWID.ROWID_RELATIVE_FNO
(row_id IN ROWID)
RETURN NUMBER;Returns the relative file number component of row_id.
FUNCTION DBMS_ROWID.ROWID_ROW_NUMBER
(row_id IN ROWID)
RETURN NUMBER;Returns the row number component of row_id.
FUNCTION DBMS_ROWID.ROWID_TO_ABSOLUTE_FNO
(row_id IN ROWID
,schema_name IN VARCHAR2
,object_name IN VARCHAR2)
RETURN NUMBER;Returns the absolute file number for row_id, schema_name, and object_name.
FUNCTION DBMS_ROWID.ROWID_TO_EXTENDED
(old_rowid IN ROWID
,schema_name IN VARCHAR2
,object_name IN VARCHAR2
,conversion_type IN INTEGER)
RETURN ROWID;Returns the extended ROWID for the restricted old_rowid, schema_name, and object_name using conversion_type. The conversion_type can be either ROWID_CONVERT_INTERNAL (ROWID was stored in a column of type ROWID) or ROWID_CONVERT_EXTERNAL (ROWID was stored in a column of type CHAR/VARCHAR/VARCHAR2).
FUNCTION DBMS_ROWID.ROWID_TO_RESTRICTED
(old_rowid IN ROWID
,conversion_type IN INTEGER)
RETURN ROWID;Returns a restricted ROWID for the extended old_rowid using conversion_type. The conversion_type can be either ROWID_CONVERT_INTERNAL (ROWID will be stored in a column of type ROWID) or ROWID_CONVERT_EXTERNAL (ROWID will be stored in a column of type CHAR/VARCHAR/VARCHAR2).
FUNCTION DBMS_ROWID.ROWID_TYPE
(row_id IN ROWID)
RETURN NUMBER;Returns ROWID_TYPE_EXTENDED or ROWID_TYPE_RESTRICTED for row_id.
FUNCTION DBMS_ROWID.ROWID_VERIFY
(rowid_in IN ROWID
,schema_name IN VARCHAR2
,object_name IN VARCHAR2
,conversion_type IN INTEGER)
RETURN NUMBER;Returns ROWID_VALID or ROWID_INVALID for rowid_in, schema_name, and object_name, using conversion_type. The conversion_type can be either ROWID_CONVERT_INTERNAL (rowid_in is stored in a column of type ROWID) or ROWID_CONVERT_EXTERNAL (rowid_in is stored in a column of type CHAR/VARCHAR/VARCHAR2).
DBMS_SESSION provides facilities to set and modify session settings, enable or disable roles, and manage session resources.
PROCEDURE DBMS_SESSION.CLOSE_DATABASE_LINK
(dblink IN VARCHAR2);Closes the database link dblink or raises an exception if dblink is not open or is in use.
PROCEDURE DBMS_SESSION.FREE_UNUSED_USER_MEMORY;
Releases freeable session memory back to the operating system (dedicated connection) or the Oracle shared pool (shared server connection).
FUNCTION DBMS_SESSION.IS_ROLE_ENABLED
(rolename IN VARCHAR2)
RETURN BOOLEAN;Returns TRUE if the rolename is currently enabled in the session.
FUNCTION DBMS_SESSION.IS_SESSION_ALIVE
(uniqueid IN VARCHAR2)
RETURN BOOLEAN;Returns TRUE if the session identified by uniqueid is still alive. Oracle8 only.
PROCEDURE DBMS_SESSION.RESET_PACKAGE;
Resets all package states in the session, destroying the values of all persistent package variables.
PROCEDURE DBMS_SESSION.SET_CLOSE_CACHED_OPEN_CURSORS
(close_cursors IN BOOLEAN);Overrides the CLOSE_CACHED_OPEN_CURSORS database parameter at the session level with the value in close_cursors.
PROCEDURE DBMS_SESSION.SET_LABEL
(lbl IN VARCHAR2);Sets the session's Trusted Oracle session label to lbl.
PROCEDURE DBMS_SESSION.SET_MLS_LABEL_FORMAT
(fmt IN VARCHAR2);Sets the session's default Trusted Oracle label format to fmt.
PROCEDURE DBMS_SESSION.SET_NLS
(param IN VARCHAR2
,value IN VARCHAR2);Sets the National Language Support parameter param to value. When value is a format mask, use a triple-quoted string.
PROCEDURE DBMS_SESSION.SET_ROLE
(role_cmd IN VARCHAR2);Enables role(s) by appending role_cmd to the SET_ROLE command and executing. Disables all roles by setting role_cmd to NONE.
PROCEDURE DBMS_SESSION.SET_SQL_TRACE
(sql_trace IN BOOLEAN);Turns SQL tracing on or off in the session according to sql_trace (TRUE = on, FALSE = off).
FUNCTION DBMS_SESSION.UNIQUE_SESSION_ID RETURN VARCHAR2;
Returns a string identifier unique to the session up to 24 bytes in length.
DBMS_SHARED_POOL contains programs to help manage the Oracle Shared Global Area (SGA) shared pool.
PROCEDURE DBMS_SHARED_POOL.ABORTED_REQUEST_THRESHOLD
(threshold_size IN NUMBER);Sets the maximum object size for which the shared pool will flush other objects to make room. Attempts to load objects larger than threshold_size bytes produce ORA-04031 errors if sufficient space is not available.
PROCEDURE DBMS_SHARED_POOL.KEEP
(name IN VARCHAR2
,flag IN CHAR DEFAULT `P');Pins the object identified by name in the shared pool. The object's type is identified by flag: "P" or "p" for package, procedure, or function; "Q" or "q" for sequences; and "R" or "r" for triggers. Specifies any other character flag to pin a cursor identified by address and hash value (from V$SQLAREA) in name.
PROCEDURE DBMS_SHARED_POOL.SIZES
(minsize IN NUMBER);Displays objects and cursors in the shared pool that exceed minsize kilobytes in size.
PROCEDURE DBMS_SHARED_POOL.UNKEEP
(name IN VARCHAR2
,flag IN CHAR DEFAULT `P');Unpins the object of type flag and identified by name from the shared pool. Valid flag values are the same values as for DBMS_SHARED_POOL.KEEP.
DBMS_SPACE contains procedures that provide internal space utilization and freelist information about table, index, and cluster segments.
PROCEDURE DBMS_SPACE.FREE_BLOCKS
(segment_owner IN VARCHAR2
,segment_name IN VARCHAR2
,segment_type IN VARCHAR2
,freelist_group_id IN NUMBER
,free_blks OUT NUMBER
,scan_limit IN NUMBER DEFAULT NULL
[ ,partition_name IN VARCHAR2 DEFAULT NULL ]);Returns into free_blks the number of blocks on the freelist for segment segment_name of type segment_type (TABLE, INDEX, or CLUSTER) owned by segment_owner in partition partition_name (optional, and Oracle8 only). Scan_limit (optional) limits the number of free blocks scanned.
PROCEDURE DBMS_SPACE.UNUSED_SPACE
(segment_owner IN VARCHAR2
,segment_name IN VARCHAR2
,segment_type IN VARCHAR2
,total_blocks OUT NUMBER
,total_bytes OUT NUMBER
,unused_blocks OUT NUMBER
,unused_bytes OUT NUMBER
,last_used_extent_file_id OUT NUMBER
,last_used_extent_block_id OUT NUMBER
,last_used_block OUT NUMBER
[ ,partition_name IN VARCHAR2 DEFAULT NULL ]);Returns the highwater mark (last_used_extent_file_id, last_used_extent_block_id, and last_used_block), space used (total_blocks, total_bytes), and space unused (unused_blocks, unused_bytes) in segment segment_name of type segment_type (TABLE, INDEX, or CLUSTER) owned by segment_owner in partition partition_name. Optional, and Oracle8 only.
DBMS_SQL provides routines for using dynamic SQL within PL/SQL. For Oracle8, this is the routine that provides support for array operations in PL/SQL.
PROCEDURE DBMS_SQL.BIND_ARRAY
(c IN INTEGER
,name IN VARCHAR2
,<table_variable IN datatype>
[,index1 IN INTEGER
,index2 IN INTEGER]);Binds the table_variable array to the placeholder name in the parsed (but not executed) SQL statement in the cursor c (returned by the OPEN_CURSOR call). For Oracle8, used to perform array processing. The <table_variable IN datatype> can be any of the following:
n_tab IN DBMS_SQL.NUMBER_TABLE c_tab IN DBMS_SQL.VARCHAR2_TABLE d_tab IN DBMS_SQL.DATE_TABLE bl_tab IN DBMS_SQL.BLOB_TABLE cl_tab IN DBMS_SQL.CLOB_TABLE bf_tab IN DBMS_SQL.BFILE_TABLE
The optional argument index1 defines the lower bound (first row) within the table and index2 defines the upper bound (last row). Oracle 8 only.
PROCEDURE DBMS_SQL.BIND_VARIABLE
(c IN INTEGER
,name IN VARCHAR2
,value IN NUMBER | VARACHAR2 | DATE | BLOB | CLOB
CHARACTER SET ANY_CS | BFILE
[,out_value_size IN INTEGER]);Binds the scalar value to the placeholder name in the parsed SQL statement in the cursor c, optionally with maximum expected size of value being out_value_size.
PROCEDURE DBMS_SQL.BIND_VARIABLE_CHAR
(c IN INTEGER
,name IN VARCHAR2
,value IN CHAR CHARACTER SET ANY_CS
[,out_value_size IN INTEGER]);Binds the scalar CHAR/NCHAR value to the placeholder name in the parsed SQL statement in the cursor c, optionally with maximum expected size of value being out_value_size.
PROCEDURE DBMS_SQL.BIND_VARIABLE_RAW
(c IN INTEGER
,name IN VARCHAR2
,value IN RAW
[,out_value_size IN INTEGER]);Binds the scalar RAW value to the placeholder name in the parsed SQL statement in the cursor c (returned by the OPEN_CURSOR call), optionally with maximum expected size of value being out_value_size.
PROCEDURE DBMS_SQL.BIND_VARIABLE_ROWID
(c IN INTEGER
,name IN VARCHAR2
,value IN ROWID);Binds the scalar ROWID value to the placeholder name in the parsed SQL statement in the cursor c.
PROCEDURE DBMS_SQL.CLOSE_CURSOR
(c IN OUT INTEGER);Closes cursor c.
PROCEDURE DBMS_SQL.COLUMN_VALUE
(c IN INTEGER
,position IN INTEGER
,value OUT NUMBER | VARCHAR | DATE | BLOB | CLOB
CHARACTER SET ANY_CS | BFILE | MLSLABEL );
CHARACTER SET ANY_CS | BFILE | MLSLABEL );
[,column_error OUT NUMBER
[,actual_length OUT INTEGER]]);Transfers the contents of column number position in the SELECT list of the fetched cursor c into the variable value, optionally setting actual_length to the pre-truncated length in bytes, and column_error to the error code for the specified value. Truncation may occur due to a difference in size between the retrieved value in the cursor and the variable length. MLSLABEL is for Trusted Oracle only.
PROCEDURE DBMS_SQL.COLUMN_VALUE
(c IN INTEGER
,position IN INTEGER
,<table_parameter IN table_type>);Transfers the array contents of column number position in the SELECT list of the fetched array from cursor c into the PL/SQL table. For Oracle8 only, the table_parameter and table_type can be any of the following:
n_tab IN DBMS_SQL.NUMBER_TABLE c_tab IN DBMS_SQL.VARCHAR2_TABLE d_tab IN DBMS_SQL.DATE_TABLE bl_tab IN DBMS_SQL.BLOB_TABLE cl_tab IN DBMS_SQL.CLOB_TABLE bf_tab IN DBMS_SQL.BFILE_TABLE
PROCEDURE DBMS_SQL.COLUMN_VALUE_CHAR
(c IN INTEGER
,position IN INTEGER
,value OUT CHAR CHARACTER SET ANY_CS
[,column_error OUT NUMBER
[,actual_length OUT INTEGER]]);Transfers the contents of column number position in the SELECT list of the fetched cursor c into the CHAR/NCHAR variable value, optionally setting actual_length to the pre-truncated length in characters, and the column_error to the error code for the specified value. Truncation may occur due to a difference in size between the retrieved value in the cursor and the variable length.
PROCEDURE DBMS_SQL.COLUMN_VALUE_LONG
(c IN INTEGER
,position IN INTEGER
,length IN INTEGER
,offset IN INTEGER
,value OUT VARCHAR2
,value_length OUT INTEGER);Transfers the contents of column number position in the SELECT list of the fetched cursor c into the VARCHAR2 variable value, starting offset bytes into the LONG column and extending for length bytes. Also sets value_length to the actual length of the retrieved value.
PROCEDURE DBMS_SQL.COLUMN_VALUE_RAW
(c IN INTEGER
,position IN INTEGER
,value OUT RAW
[,column_error OUT NUMBER
[,actual_length OUT INTEGER]]);Transfers the contents of column number position in the SELECT list of the fetched cursor c into the RAW variable value, optionally setting actual_length to the pre-truncated length in bytes, and the column_error to the error code for the specified value. Truncation may occur due to a difference in size between the retrieved value in the cursor and the variable length.
PROCEDURE DBMS_SQL.COLUMN_VALUE_ROWID
(c IN INTEGER
,position IN INTEGER
,value OUT ROWID);
[,column_error OUT NUMBER
[,actual_length OUT INTEGER]]);Transfers the contents of column number position in the SELECT list of the fetched cursor c into the ROWID variable value, optionally setting actual_length to the pre-truncated length in bytes, and the column_error to the error code for the specified value. Truncation may occur due to a difference in size between the retrieved value in the cursor and the variable length.
PROCEDURE DBMS_SQL.DEFINE_ARRAY
(c IN INTEGER
,position IN INTEGER
,<table_parameter IN table_type>
,cnt IN INTEGER
,lower_bound IN INTEGER);Defines the datatype and size of the elements in the fetch array for column number position in the SELECT list of the cursor c as the same datatype and size as the nested table table_parameter, beginning with row lower_bound, and having a maximum array size of cnt rows. For Oracle8, table_parameter and table_type can be any of these:
n_tab IN DBMS_SQL.NUMBER_TABLE c_tab IN DBMS_SQL.VARCHAR2_TABLE d_tab IN DBMS_SQL.DATE_TABLE bl_tab IN DBMS_SQL.BLOB_TABLE cl_tab IN DBMS_SQL.CLOB_TABLE bf_tab IN DBMS_SQL.BFILE_TABLE
PROCEDURE DBMS_SQL.DEFINE_COLUMN
(c IN INTEGER
,position IN INTEGER
, column IN NUMBER | DATE | BLOB | CLOB CHARACTER SET
ANY_CD | BFILE | MLSLABEL);The variable or expression column defines the datatype for column number position in the SELECT list of the cursor c. MLSLABEL is for Trusted Oracle only.
PROCEDURE DBMS_SQL.DEFINE_COLUMN
(c IN INTEGER
,position IN INTEGER
,column IN VARCHAR2 CHARACTER SET ANY_CS
,column_size IN INTEGER);The variable or expression column defines the datatype as VARCHAR2/NVARCHAR2 and size as column_size characters for column number position in the SELECT list of the cursor c.
PROCEDURE DBMS_SQL.DEFINE_COLUMN_CHAR
(c IN INTEGER
,position IN INTEGER
,column IN CHAR CHARACTER SET ANY_CS
,column_size IN INTEGER);The variable or expression column defines the datatype as CHAR/NCHAR and size as column_size characters for column number position in the SELECT list of the cursor c.
PROCEDURE DBMS_SQL.DEFINE_COLUMN_LONG
(c IN INTEGER
,position IN INTEGER);Defines the datatype as LONG for column number position in the SELECT list of the cursor c.
PROCEDURE DBMS_SQL.DEFINE_COLUMN_RAW
(c IN INTEGER
,position IN INTEGER
,column IN RAW
,column_size IN INTEGER);The variable or expression column as RAW of size column_size bytes for column number position in the SELECT list of the cursor c.
PROCEDURE DBMS_SQL.DEFINE_COLUMN_ROWID
(c IN INTEGER
,position IN INTEGER
,column IN ROWID);The variable or expression column defines the datatype as ROWID for column number position in the SELECT list of the cursor c.
PROCEDURE DBMS_SQL.DESCRIBE_COLUMNS
(c IN INTEGER
,col_cnt OUT INTEGER
,desc_t OUT DESC_TAB);Populates PL/SQL table desc_t of type DBMS_SQL.DESC_REC with the description of columns of cursor c. col_cnt is the number of columns in c and the number of rows in desc_t.
FUNCTION DBMS_SQL.EXECUTE
(c IN INTEGER)
RETURN INTEGER;For INSERT, UPDATE, or DELETE statements, returns the number of rows processed by executing the cursor c. For all other SQL statements, executes the cursor c and returns an undefined value.
FUNCTION DBMS_SQL.EXECUTE_AND_FETCH
(c IN INTEGER
,exact IN BOOLEAN DEFAULT FALSE)
RETURN INTEGER;Returns the number of rows fetched by executing and fetching cursor c. Raises an exception if more than one row is fetched when exact is set to TRUE. Multiple rows require Oracle8 and array processing.
FUNCTION DBMS_SQL.FETCH_ROWS
(c IN INTEGER)
RETURN INTEGER;Fetches and returns the number of rows fetched from cursor c, or 0 (zero) when there are no more rows to fetch.
FUNCTION DBMS_SQL.IS_OPEN
(c IN INTEGER)
RETURN BOOLEAN;Returns TRUE if cursor c is open, FALSE otherwise.
FUNCTION DBMS_SQL.LAST_ERROR_POSITION RETURN INTEGER;
Returns the byte offset in the SQL statement where the last error occurred. Must be called immediately after an EXECUTE or EXECUTE_AND_FETCH (typically in the exception handler).
FUNCTION DBMS_SQL.LAST_ROW_COUNT RETURN INTEGER;
Returns the total number of rows fetched so far -- similar to the %ROWCOUNT attribute of static cursors.
FUNCTION DBMS_SQL.LAST_ROW_ID RETURN ROWID;
Returns the ROWID of the most recently fetched row. Must be called immediately after a FETCH_ROWS or EXECUTE_AND_FETCH.
FUNCTION DBMS_SQL.LAST_SQL_FUNCTION_CODE RETURN INTEGER;
Returns the SQL function code for the SQL statement. A complete list of these function codes can be found in the Oracle Corporation's Server Reference Manual in the section describing the table column V$SESSION.COMMAND.
FUNCTION DBMS_SQL.OPEN_CURSOR RETURN INTEGER;
Returns an INTEGER pointer to memory allocated for a dynamic cursor.
PROCEDURE DBMS_SQL.PARSE
(c IN INTEGER
,statement IN VARCHAR2
,language_flag IN INTEGER);Parses a SQL statement less than 32K bytes in length and associates it with cursor c, following database behavior specified by language_flag (either DBMS_SQL.NATIVE, DBMS_SQL.V7, or DBMS_SQL.V6). Do not terminate your SQL string with a semicolon unless it is a PL/SQL block. For DDL statements (e.g., TRUNCATE TABLE), this also executes the statement.
PROCEDURE DBMS_SQL.PARSE
(c IN INTEGER
,statement IN VARCHAR2S
,lb IN INTEGER
,ub IN INTEGER
,lfflg IN BOOLEAN
,language_flag IN INTEGER);Parses a SQL statement contained in rows lb through ub in the PL/SQL table and associates it with cursor c, following database behavior specified by language_flag (either DBMS_SQL.NATIVE, DBMS_SQL.V7, or DBMS_SQL.V6), and appending a line feed after each row from statement if lfflg is set to TRUE.
PROCEDURE DBMS_SQL.VARIABLE_VALUE
(c IN INTEGER
,name IN VARCHAR2
,value OUT NUMBER | VARCHAR2 | DATE | BLOB | CLOB
CHARACTER SET ANY_CS| BFILE | MLSLABEL);Retrieves the value of the host variable name in cursor c into the PL/SQL NUMBER variable value. MLSLABEL is for Trusted Oracle only.
PROCEDURE DBMS_SQL.VARIABLE_VALUE
(c IN INTEGER
,name IN VARCHAR2
,value IN <table_type>);Retrieves the values of the host variable name in cursor c into the PL/SQL table value. For Oracle8 only, the table_type can be one of the following:
DBMS_SQL.NUMBER_TABLE DBMS_SQL.VARCHAR2_TABLE DBMS_SQL.DATE_TABLE DBMS_SQL.BLOB_TABLE DBMS_SQL.CLOB_TABLE DBMS_SQL.BFILE_TABLE
PROCEDURE DBMS_SQL.VARIABLE_VALUE_CHAR
(c IN INTEGER
,name IN VARCHAR2
,value OUT CHAR CHARACTER SET ANY_CS);Retrieves the value of the host variable name in cursor c into the CHAR/NCHAR table value.
PROCEDURE DBMS_SQL.VARIABLE_VALUE_RAW
(c IN INTEGER
,name IN VARCHAR2
,value OUT RAW);Retrieves the value of the host variable name in cursor c into the RAW variable value.
PROCEDURE DBMS_SQL.VARIABLE_VALUE_ROWID
(c IN INTEGER
,name IN VARCHAR2
,value OUT ROWID);Retrieves the value of the host variable name in cursor c into the ROWID variable value.
DBMS_STANDARD contains "kernel extensions to package STANDARD." These include functions and procedures for use in triggers to support transactions. These functions and procedures, like those in package STANDARD, are special in that they do not need to be qualified with the owner or package name, and are usually assumed to be part of the PL/SQL language.
PROCEDURE DBMS_STANDARD.RAISE_APPLICATION_ERROR
(num BINARY_INTEGER
,msg VARCHAR2
,keeperrorstack boolean default FALSE);Raises PL/SQL exception num, together with text msg from a stored program. The error can be placed together with any other errors on the error stack. If keeperrorstack is set to TRUE, default behavior is to replace the error stack with this single exception. num can range from -20999 to -20000, and msg can be up to 2048 bytes long.
FUNCTION INSERTING RETURN boolean; FUNCTION DELETING RETURN boolean; FUNCTION UPDATING RETURN boolean; FUNCTION UPDATING (colnam VARCHAR2) RETURN boolean;
Conditional predicates used to determine the type of Data Manipulation Language (DML) operation that caused a trigger to fire. These functions are only useful within triggers; for example "...IF INSERTING THEN...."
PROCEDURE COMMIT; PROCEDURE COMMIT_CM (vc VARCHAR2); PROCEDURE ROLLBACK_NR; PROCEDURE ROLLBACK_SV(save_point VARCHAR2); PROCEDURE SAVEPOINT(save_point VARCHAR2); PROCEDURE SET_TRANSACTION_USE(vc VARCHAR2);
These procedures support transaction control. They are analogous to the SQL statements: COMMIT, COMMIT COMMENT, ROLLBACK, ROLLBACK TO SAVEPOINT, SAVEPOINT, and SET TRANSACTION USE ROLLBACK SEGMENT.
DBMS_SYSTEM contains procedures for setting special internal trace events, including SQL tracing, at the session level.
PROCEDURE DBMS_SYSTEM.READ_EV
(iev BINARY_INTEGER
,oev OUT BINARY_INTEGER);Returns the current session's event level setting for trace event number iev into variable oev.
PROCEDURE DBMS_SYSTEM.SET_EV
(si BINARY_INTEGER
,se BINARY_INTEGER
,ev BINARY_INTEGER
,le BINARY_INTEGER
,nm IN VARCHAR2);Sets the level for event number ev in the session identified by sid si and serial number se to the value specified by le. Variable nm is used to specify the event name.
PROCEDURE DBMS_SYSTEM.SET_SQL_TRACE_IN_SESSION
(sid IN NUMBER
,serial# IN NUMBER
,sql_trace IN BOOLEAN);Turns SQL tracing on or off in the session identified by sid (sid) and serial number (serial#) according to the value of sql_trace (TRUE = on; FALSE = off).
DBMS_TRANSACTION contains a number of programs for local and distributed transaction management.
PROCEDURE DBMS_TRANSACTION.ADVISE_COMMIT;
Advises remote databases that in-doubt distributed transactions should be committed if possible.
PROCEDURE DBMS_TRANSACTION.ADVISE_NOTHING;
Removes advice from remote databases regarding in-doubt distributed transactions.
PROCEDURE DBMS_TRANSACTION.ADVISE_ROLLBACK;
Advises remote databases that in-doubt distributed transactions should be rolled back.
PROCEDURE DBMS_TRANSACTION.BEGIN_DISCRETE_TRANSACTION;
Sets the current transaction to use discrete transaction processing.
PROCEDURE DBMS_TRANSACTION.COMMIT;
Commits the current transaction.
PROCEDURE DBMS_TRANSACTION.COMMIT_COMMENT
(cmnt IN VARCHAR2);Commits the current transaction and sends cmnt as the in-doubt transaction comment to remote databases during distributed transactions.
PROCEDURE DBMS_TRANSACTION.COMMIT_FORCE
(xid IN VARCHAR2
[,scn IN VARCHAR2 DEFAULT NULL]);Forces the local portion of the in-doubt distributed transaction identified by transaction id xid and (optionally) system change number scn to commit.
FUNCTION DBMS_TRANSACTION.LOCAL_TRANSACTION_ID
(create_transaction IN BOOLEAN := FALSE)
RETURN VARCHAR2;Returns Oracle's unique identifier for the current transaction, optionally beginning a new transaction when create_transaction is TRUE.
PROCEDURE DBMS_TRANSACTION.PURGE_LOST_DB_ENTRY
(xid IN VARCHAR2);Forces Oracle to purge all local entries for the distributed transaction identified by xid when a participating node has been permanently lost.
PROCEDURE DBMS_TRANSACTION.PURGE_MIXED
(xid IN VARCHAR2);Forces Oracle to purge local entries for the mixed outcome distributed transaction identified locally by xid.
PROCEDURE DBMS_TRANSACTION.READ_ONLY;
Establishes transaction-level read consistency, where all queries return read-consistent images of data as of the transaction's start time.
PROCEDURE DBMS_TRANSACTION.READ_WRITE;
Establishes statement-level read consistency, which is also the default behavior.
PROCEDURE DBMS_TRANSACTION.ROLLBACK;
Rolls back the current transaction.
PROCEDURE DBMS_TRANSACTION.ROLLBACK_FORCE
(xid IN VARCHAR2);Rolls back the local portion of the in-doubt distributed transaction identified by xid.
PROCEDURE DBMS_TRANSACTION.ROLLBACK_SAVEPOINT
(savept IN VARCHAR2);Rolls back the current transaction to the savepoint savept.
PROCEDURE DBMS_TRANSACTION.SAVEPOINT
(savept IN VARCHAR2);Sets a savepoint named savept in the current transaction.
FUNCTION DBMS_TRANSACTION.STEP_ID RETURN NUMBER;
Returns a unique positive integer that orders the DML operations of the current transaction.
PROCEDURE DBMS_TRANSACTION.USE_ROLLBACK_SEGMENT
(rb_name IN VARCHAR2);Assigns the current transaction to rollback segment rb_name.
DBMS_UTILITY provides procedures and functions to perform a number of useful tasks, including parsing and tokenizing name references, obtaining database configuration information, analyzing objects, obtaining error and call stack information, and timing code execution.
PROCEDURE DBMS_UTILITY.ANALYZE_DATABASE
(method IN VARCHAR2
,estimate_rows IN NUMBER DEFAULT NULL
,estimate_percent IN NUMBER DEFAULT NULL
,method_opt IN VARCHAR2 DEFAULT NULL);Analyzes all tables, clusters, and indexes in the database using option method (ESTIMATE, COMPUTE, or DELETE). When method is ESTIMATE, either estimate_rows or estimate_percent must be specified to identify sample size. Additional analyze options specifiable by method_opt are: FOR TABLE; FOR ALL COLUMNS [SIZE N]; FOR ALL INDEXED COLUMNS [SIZE N]; or FOR ALL INDEXES.
PROCEDURE DBMS_UTILITY.ANALYZE_PART_OBJECT
(schema IN VARCHAR2 DEFAULT NULL
,object_name IN VARCHAR2 DEFAULT NULL
,object_type IN CHAR DEFAULT `T'
,command_type IN CHAR DEFAULT `E'
,command_opt IN VARCHAR2 DEFAULT NULL
,sample_clause IN VARCHAR2
DEFAULT `SAMPLE 5 PERCENT');Analyzes the partitioned table or index object_name owned by schema of type object_type (T = TABLE, I = INDEX) in parallel using Oracle job queue processes. command_type indicates the type of analysis to perform and command_opt specifies additional options. sample_clause specifies sample size when command_type is E (estimate) using `SAMPLE N ROWS' or `SAMPLE N PERCENT'. Oracle8 only.
Valid command_typevalues are: C for compute statistics, E for estimate statistics, D for delete statistics, or V for validate structure.
Valid command_opt values for command_type C or T are: FOR TABLE, FOR ALL LOCAL INDEXES, FOR ALL COLUMNS, or any combination of FOR options of the ANALYZE command.
Valid command_opt values for command_type V are: CASCADE when object_type is T (table).
PROCEDURE DBMS_UTILITY.ANALYZE_SCHEMA
(schema IN VARCHAR2
,method IN VARCHAR2
,estimate_rows IN NUMBER DEFAULT NULL
,estimate_percent IN NUMBER DEFAULT NULL
,method_opt IN VARCHAR2 DEFAULT NULL);Analyzes all tables, clusters, and indexes in schema using method (ESTIMATE, COMPUTE, or DELETE). When method is ESTIMATE, either estimate_rows or estimate_percent must be specified to identify sample size. Additional analyze options specifiable by method_opt are: FOR TABLE, FOR ALL COLUMNS [SIZE N], FOR ALL INDEXED COLUMNS [SIZE N], or FOR ALL INDEXES.
PROCEDURE DBMS_UTILITY.COMMA_TO_TABLE
(list IN VARCHAR2
,tablen OUT BINARY_INTEGER
,tab OUT UNCL_ARRAY);Parses the comma-delimited list and returns the tokens in the PL/SQL table tab of type DBMS_UTILITY.UNCL_ARRAY. The number of rows in tab is returned in tablen.
PROCEDURE DBMS_UTILITY.COMPILE_SCHEMA
(schema IN VARCHAR2);Compiles all stored PL/SQL programs (procedures, functions, and packages) owned by schema.
FUNCTION DBMS_UTILITY.DATA_BLOCK_ADDRESS_BLOCK
(dba IN NUMBER)
RETURN NUMBER;Returns the block offset number of the data block address specified in dba.
FUNCTION DBMS_UTILITY.DATA_BLOCK_ADDRESS_FILE (dba IN NUMBER) RETURN NUMBER;
Returns the file number component of the data block address specified in dba.
PROCEDURE DBMS_UTILITY.DB_VERSION
(version OUT VARCHAR2
,compatibility OUT VARCHAR2);Returns the Oracle version of the database in version and the setting of the INIT.ORA COMPATIBLE parameter in compatibility (or NULL). Oracle8 only.
PROCEDURE DBMS_UTILITY.EXEC_DDL_STATEMENT
(parse_string IN VARCHAR2);Executes the DDL statement specified by parse_string. Oracle8 only.
FUNCTION DBMS_UTILITY.FORMAT_CALL_STACK RETURN VARCHAR2;
Returns the current PL/SQL call stack as a formatted string.
FUNCTION DBMS_UTILITY.FORMAT_ERROR_STACK RETURN VARCHAR2;
Returns the current PL/SQL error stack as a formatted string.
FUNCTION DBMS_UTILITY.GET_HASH_VALUE
(name IN VARCHAR2
,base IN NUMBER
,hash_size IN NUMBER)
RETURN NUMBER;Returns a hash function value for name with a minimum possible value of base using a hash table of size hash_size.
FUNCTION DBMS_UTILITY.GET_PARAMETER_VALUE
(parnam IN VARCHAR2
,intval IN OUT BINARY_INTEGER
,strval IN OUT VARCHAR2)
RETURN BINARY_INTEGER;Returns information about the current setting of the database initialization (INIT.ORA) parameter parnam. Oracle8 only.
intval returns the following values:
The value of a numeric parnam
The length of a string parnam
0 for FALSE and 1 for TRUE when parnam is Boolean
strval returns NULL, or the value of a string parameter: 0 if the parameter is Boolean or numeric; 1 if the parameter is a string.
FUNCTION DBMS_UTILITY.GET_TIME RETURN NUMBER;
Returns a number indicating the number of 1/100ths of a seconds elapsed since an (unknown) arbitrary time in the past.
FUNCTION DBMS_UTILITY.IS_PARALLEL_SERVER RETURN BOOLEAN;
Returns TRUE if the instance is running in parallel server mode, and FALSE otherwise.
FUNCTION DBMS_UTILITY.MAKE_DATA_BLOCK_ADDRESS
(file IN NUMBER
,block IN NUMBER)
RETURN NUMBER;Returns a valid data block address for file at block offset block.
PROCEDURE DBMS_UTILITY.NAME_RESOLVE
(name IN VARCHAR2
,context IN NUMBER
,schema OUT VARCHAR2
,part1 OUT VARCHAR2
,part2 OUT VARCHAR2
,dblink OUT VARCHAR2
,part1_type OUT NUMBER
,object_number OUT NUMBER);Resolves the reference name and returns specific identification information about the object referenced as follows: schema is the object's owner; part1 is the object name or package name for a package; part2 is the program name when object is a package; dblink is the database link if name resolves to a remote object; part1_type identifies the type of object; object_number is the local object number or NULL if name could not be fully resolved locally.
part1_type is 5 if the object is a synonym; 7 if the object is a procedure; 8 if the object is a function; 9 if the object is a package.
Note that context must be set to 1.
PROCEDURE DBMS_UTILITY.NAME_TOKENIZE
(name IN VARCHAR2
,a OUT VARCHAR2
,b OUT VARCHAR2
,c OUT VARCHAR2
,dblink OUT VARCHAR2
,nextpos OUT BINARY_INTEGER);Uses the PL/SQL parser to tokenize the reference name into its constituent components according to the following format:
a [ . b [ . c ] ] [ @dblink ]
nextpos is the starting position of the next token.
FUNCTION DBMS_UTILITY.PORT_STRING RETURN VARCHAR2;
Returns a string with operating system-specific identifying information about the version of Oracle that is running.
PROCEDURE DBMS_UTILITY.TABLE_TO_COMMA
(tab IN UNCL_ARRAY
,tablen OUT BINARY_INTEGER
,list OUT VARCHAR2);Converts the PL/SQL table tab of type DBMS_UTILITY.UNCL_ARRAY into a comma-delimited string returned in list, with the number of rows converted returned in tablen.
UTL_FILE allows PL/SQL programs to read from and write to operating system files on the server where the Oracle database resides.
PROCEDURE UTL_FILE.FCLOSE
(file IN OUT FILE_TYPE);Closes the file identified by file handle file and sets the value of file id to NULL.
PROCEDURE UTL_FILE.FCLOSE_ALL;
Closes all opened files; however, the id fields of any file handles will not be set to NULL.
PROCEDURE UTL_FILE.FFLUSH
(file IN FILE_TYPE);Forces any buffered data for file handle file to be written out immediately.
FUNCTION UTL_FILE.FOPEN
(location IN VARCHAR2
,filename IN VARCHAR2
,open_mode IN VARCHAR2)
RETURN FILE_TYPE;Returns a file handle of type UTL_FILE.FILE_TYPE upon successfully opening file filename in directory location in mode open_mode, or raises an exception.
Valid open_mode values are:
| R = open file in read-only mode. |
| W = open file in read-write mode and replace contents. |
| A = open file in read-write mode and append to contents. |
Valid location values are directories specified by the Oracle initialization parameter UTL_FILE_DIR.
PROCEDURE UTL_FILE.GET_LINE
(file IN FILE_TYPE
,buffer OUT VARCHAR2);Reads the next line in file handle file into buffer. Raises NO_DATA_FOUND exception when reading past end of file and VALUE_ERROR exception when buffer is too small for the data.
FUNCTION UTL_FILE.IS_OPEN
(file IN FILE_TYPE)
RETURN BOOLEAN;Returns TRUE if the file handle file is currently open in any mode and FALSE otherwise.
PROCEDURE UTL_FILE.NEW_LINE
(file IN FILE_TYPE
,lines IN NATURAL := 1);Places lines newline characters into file handle file.
PROCEDURE UTL_FILE.PUT
(file IN FILE_TYPE
,buffer IN VARCHAR2);Places the data in buffer into file handle file without a newline terminator.
PROCEDURE UTL_FILE.PUT_LINE
(file IN FILE_TYPE
,buffer IN VARCHAR2);Places the data in buffer into file handle file with a newline character appended.
PROCEDURE UTL_FILE.PUTF
(file IN FILE_TYPE
,format IN VARCHAR2
,arg1 IN VARCHAR2 DEFAULT NULL
,arg2 IN VARCHAR2 DEFAULT NULL
,arg3 IN VARCHAR2 DEFAULT NULL
,arg4 IN VARCHAR2 DEFAULT NULL
,arg5 IN VARCHAR2 DEFAULT NULL);Writes a formatted message out to file handle file using format as the template, replacing up to five %s format elements with the values of arg1-arg5. format can contain the following items: any literal text; %s indicating argN substitution (up to five allowed); or \n indicating newline (any number allowed).
UTL_RAW provides routines for accessing and manipulating RAW datatypes. These routines perform conversions, divisions, combinations, and bitwise operations on RAW datatypes.
FUNCTION UTL_RAW.BIT_AND
(r1 IN RAW
,r2 IN RAW)
RETURN RAW;Returns the bitwise logical AND of r1 and r2.
FUNCTION UTL_RAW.BIT_COMPLEMENT
(r1 IN RAW
,r2 IN RAW)
RETURN RAW;Returns the bitwise logical complement of r1 and r2.
FUNCTION UTL_RAW.BIT_OR
(r1 IN RAW
,r2 IN RAW)
RETURN RAW;Returns the bitwise logical OR of r1 and r2.
FUNCTION UTL_RAW.BIT_XOR
(r1 IN RAW
,r2 IN RAW)
RETURN RAW;Returns the bitwise logical XOR of r1 and r2.
FUNCTION UTL_RAW.CAST_TO_RAW
(c IN VARCHAR2)
RETURN RAW;Returns VARCHAR2 c to RAW, converting datatype only.
FUNCTION UTL_RAW.CAST_TO_VARCHAR2
(r IN RAW)
RETURN VARCHAR2;Returns RAW c to VARCHAR2, converting datatype only.
FUNCTION UTL_RAW.COMPARE
(r1 IN RAW
,r2 IN RAW
,pad IN RAW DEFAULT NULL)
RETURN NUMBER;Returns 0 if r1 and r2 are identical. Returns first byte position of difference in r1 and r2. If r1 and r2 are different lengths, right pad the shorter with pad.
FUNCTION UTL_RAW.CONCAT
(r1 IN RAW DEFAULT NULL
,r2 IN RAW DEFAULT NULL
,r3 IN RAW DEFAULT NULL
,r4 IN RAW DEFAULT NULL
,r5 IN RAW DEFAULT NULL
,r6 IN RAW DEFAULT NULL
,r7 IN RAW DEFAULT NULL
,r8 IN RAW DEFAULT NULL
,r9 IN RAW DEFAULT NULL
,r10 IN RAW DEFAULT NULL
,r11 IN RAW DEFAULT NULL
,r12 IN RAW DEFAULT NULL)
RETURN RAW;Returns the concatenation of r1 through r12. The result must be less than 32K. r3 through r12 are optional.
FUNCTION UTL_RAW.CONVERT
(r IN RAW
,to_charset IN VARCHAR2
,from_charset IN VARCHAR2)
RETURN RAW;Returns r in to_charset after conversion from from_charset. from_charset and to_charset are NLS character sets.
FUNCTION UTL_RAW.COPIES
(r IN RAW
,n IN NUMBER)
RETURN RAW;Concatenates r, n number of times, and returns the result.
FUNCTION UTL_RAW.LENGTH
(r IN RAW)
RETURN NUMBER;Returns the number of bytes in r.
FUNCTION UTL_RAW.OVERLAY
(overlay_str IN RAW
,target IN RAW
,pos IN BINARY_INTEGER DEFAULT 1
,len IN BINARY_INTEGER DEFAULT NULL
,pad IN RAW DEFAULT NULL)
RETURN RAW;Returns the target overlaid with the overlay_str string beginning pos bytes into target and continuing for len bytes, right padding with pad as necessary. If pos is greater than the length of target, fills the missing section with pad.
FUNCTION UTL_RAW.REVERSE
(r IN RAW)
RETURN RAW;Returns the bytes in r in reverse order.
FUNCTION UTL_RAW.SUBSTR
(r IN RAW
,pos IN BINARY_INTEGER
,len IN BINARY_INTEGER DEFAULT NULL)
RETURN RAW;Returns a portion of r beginning at pos and extending for len bytes.
FUNCTION UTL_RAW.TRANSLATE
(r IN RAW
,from_set IN RAW
,to_set IN RAW)
RETURN RAW;Returns the contents of r, translating bytes found in from_set to to_set. If from_set is longer than to_set, the unmatched bytes are removed from r.
FUNCTION UTL_RAW.TRANSLITERATE
(r IN RAW
,to_set IN RAW DEFAULT NULL
,from_set IN RAW DEFAULT NULL
,pad IN RAW DEFAULT NULL)
RETURN RAW;Returns the contents of r, translating bytes found in from_set to to_set. If from_set is longer than to_set, the unmatched bytes are translated to pad.
FUNCTION UTL_RAW.XRANGE
(start_byte IN RAW DEFAULT NULL
,end_byte IN RAW DEFAULT NULL)
RETURN RAW;Returns a raw string containing all bytes in order between start_byte and end_byte, inclusive. If start_byte is greater than end_byte, the result wraps from 0xFF to 0x00.
UTL_REF contains routines for selecting and modifying instances of an object type in an object table. The name of the table does not have to be known. Oracle8.0.4 only.
PROCEDURE UTL_REF.DELETE_OBJECT
(reference IN REF ANY);Deletes the object (actually the row containing the object) identified by reference.
PROCEDURE UTL_REF.LOCK_OBJECT
(reference IN REF ANY);Locks the object referenced by reference.
PROCEDURE UTL_REF.LOCK_OBJECT
(reference IN REF ANY
,object IN OUT ANY);Locks the object referenced by reference and retrieves the object into object. Similar to a SELECT FOR UPDATE statement.
PROCEDURE UTL_REF.SELECT_OBJECT
(reference IN REF ANY
,object IN OUT ANY);Retrieves the object referenced by reference into object.
PROCEDURE UTL_REF.UPDATE_OBJECT
(reference IN REF ANY
,object IN OUT ANY);Replaces an object in the database identified by reference with the object object.
|  | |
| 1.2 Conventions | 1.4 Built-in Functions |
Copyright (c) 2000 O'Reilly & Associates. All rights reserved.